Corona-engl.jpg

Our additional modules ensure intelligent and meaningful expansion.

DSCF0223Chamber filter press

BIBKO® recycling systems can be supplemented by appropriate water purification systems such as chamber filter presses, treatment towers and hydrocyclones.

externes BecherwerkExternal bucket elevator

The external bucket elevator is an alternative to the pump discharge conveyor. This bucket elevator is located on the main shaft of the ComTec recycling system model. The attached buckets take up the wash water, as well as the residual material, and feed it to the actual recycling system.
In addition, the external bucket elevator allows collected wash water (e.g. from the mixing plant) to be fed into the recycling system.

1600 Amos SKT 20191011 3Sand-gravel separation

Sand-gravel separation makes it possible to separate the recovered components of the concrete (sand and gravel) into two or more parts.

dosierpufferDosing buffer made of galvanised steel

The productivity of a recycling system can be increased with a dosing buffer. Ready-mixed concrete vehicles can be emptied much faster without affecting the washout quality and separation cut. As a result of the higher emptying speed, the vehicles' time spent at the system is reduced. The dosing buffer is installed directly in front of the recycling system and first buffers the residual concrete. The material is then continuously fed to the downstream recycling system with the correct conveying speed.

Dosing buffer with pump emptying conveyor

The pump discharge conveyor offers a separate emptying station for concrete pumps and offers the possibility of feeding material at floor level. Wash water, as well as concrete residues, are collected in a hopper installed at floor level and continuously fed to the recycling system by means of an auger. The recycling system no longer needs to be lowered.
In addition, the pump discharge conveyor enables wash water (e.g. from the mixing plant) to be fed into the recycling system.

DSCF0223

WP 20170614 012c